MobileDemand xTablet C1200 Manual de usuario descargar pdf (Pagina 20)

Installing the Battery

To install the battery, follow the steps below:

1. Slide and hold the battery latch to the unlock

position.

2. Align and insert the battery to the battery

compartment.

3. Push completely until the battery locks into place.

4. Release the latch to the lock position to secure the

battery.

Getting

Started

Charging the

Battery

The Lithium-ion battery is not fully-charged upon purchase.

To charge the battery, follow the steps below:

1. Install the battery to your xTablet Convertible. See procedures above.

2. Connect the AC adapter to the DC-in jack of your xTablet Convertible.

3. Connect the AC adapter to the power cord.

4. Plug the power cord to an electrical outlet.

NOTE

•

The charging time may be longer if you are using your xTablet

Convertible while charging the battery.

CAUTION

•

DO NOT charge the battery if the temperature is below 0ºC or higher than

50ºC.

•

Use only the supplied AC adapter. Using other AC adapters may damage the

battery or your xTablet Convertible.

Checking the Battery

Level

The Battery LED flashes red when the battery is nearly depleted.

When this happens, save your work and plug the AC adapter to charge the

battery or replace the battery with a fully charged one.

NOTE

•

Make sure the system has shut down before you change the battery.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 45 46

Sin comentarios

MobileDemand xTablet C1200 Manual de usuario Pagina 20